Materials:
- Soft fabric for backing (minky, fleece, I used dimple minky for a little bit of texture)
- Cute pattern fabric for the top
- A few different color ribbons (fabric ribbon only, no wires. I used 4 different ribbons that matched my pattern fabric.)
Cut your fabric to size, I cut mine to 18.5" by 18.5". I cut the minky a little bit larger and then serged the edges to get it down to 18.5".
Next cut your ribbons to size, I cut mine to 5" long. I used 32 pieces of ribbon (8 of each color). I placed them around the edges to get a sense of the spacing, leave a little bit of room around the corners so it's not too crowded.
Fold each ribbon in half and pin it on top of the patterned fabric - the patterned fabric should be face up and the edges of the ribbon should be lined up with the edge of the fabric.
Sew along the edge 1/4" in. Once you've sewn around all 4 sides, place the backing fabric right side down on top of your patterned fabric.
Sew along the edge 1/2" in, make sure to leave a few inches open on one side so that you can flip the blanket.
Flip the blanket right side out and sew along the edge 1/4" in. Make sure you close up the hole that you used for flipping.
And now you're done!
No comments:
Post a Comment